Volume 30, No. 2 Contents

Contributed Papers:

  • Modification of the Drain Current on a Metal-Oxide-Semiconductor Field-Effect Transistor with Ferrite Gate Oxide
    N. Wakiya, H. Wada, K. Shimizu, S. Mizukami, M. Machi, N. Mizutani, and K. Shinozaki
  • Magnetization and Magneto-resistance in an MoO2/CrO2Mixed System
    Y. Kimishima, Y. Satoh, M. Uehara, T. Sasaki, M. Matsuo, and K. Honma
  • Reducing the Disorder/Order Transition Temperature of FePt Film by Using an Ar-Discharge Cleaning Method
    S. Soeya, and Y. Takahashi

Magnetic Recording

  • Study of Recording Performances for Co-Ni-Mn Spinel Fine Particle Media*
    H. Nishio, and H. Yamamoto
  • Influence of Oblique Magnetic Field from Duplication Magnet on Magnetic Duplication Characteristics*
    S. Tomikawa, N. Inaba, T. Komine, R. Sugita, and T. Muranoi
  • Analysis of the Thermal Magnetic Noise Spectrum of TMR Heads by Micromagnetic Simulation*
    H. Akimoto, N. Mukouyama, H. Kanai, and Y. Uehara
  • Numerical Analysis of the Magnetization of Recording Layers Recorded by Magnetic Duplication and Magnetic Head Writing*
    A. Ohta, T. Komine, R. Sugita, and T. Muranoi
  • Mechanism of Coercivity Reduction for a Magnetic Particle with a Coercivity Control Layer*
    C. Saito, and K. Yoshida
  • Influences of Medium Erased States on Reading Properties of a GMR Head*
    H. Ono, Y. Imai, and K. Yoshida
  • Magnetization Reversal and Switching Field of CoPt/Ru Patterned Films*
    K. Mitsuzuka, T. Shimatsu, H. Muraoka, N. Kikuchi, J. C. Lodder
  • Analysis of Nonlinear Distortion in Perpendicular Magnetic Recording*
    K. Seki, M. Hashimoto, K. Miura, H. Muraoka, H. Aoi, and Y. Nakamura
  • Magnetic Properties of Magnetic Dot Arrays with a Soft Magnetic Underlayer*
    Y. Kondo, T. Keitoku, S. Takahashi, N. Honda, and K. Ouchi
  • Spike Mapping on Double-Layered Media by the Variation Detection Method*
    T. Kurosawa, T. Suzuki, K. Yamakawa, and N. Honda
  • Influence of Magnetic Clustering on Track-Edge Noise in Perpendicular Magnetic Recording*
    D. Sudo, M. Hashimoto, K. Miura, H. Muraoka, H. Aoi, and Y. Nakamura
  • Study of the Pinning Assist Effect of Co100-xFex-NOL*
    H. Endo, M. Doi, N. Hasegawa, and M. Sahashi
  • Fabrication of L10 Ordered Fe-Ni-Pt Films and Their Magnetic Properties*
    K. Sueki, Y. Kitamoto, and M. Kaneko
  • Proposal for the Use of Soft Magnetic Material with Negative Uniaxial Magnetocrystalline Anisotropy as an SUL to Suppress both WATE and Spike Noise*
    A. Hashimoto, S. Saito, and M. Takahashi

Hard Magnetic Materials

  • Magnetic Properties of TbCu7-Type Sm-Fe-Co-Mn System Nitrides*
    H. Yamamoto, and R. Nakamura
  • Magnetic Properties of Sr-Zn-W-Type Ferrite Powders and Application to a Torque Limiter of Bonded Magnets Prepared by Using These Powders*
    H. Yamamoto, Y. Koizumi, and H. Yamaguchi
  • Magnetic Properties of High Coercivity Melt-Spun Didymium-Fe-Co-Nb-Y-B System Ribbons and Their Bonded Magnets*
    H. Yamamoto, K. Furusawa, and N. Miyashita
  • Examination of Manufacturing Condition for Co-Ni Spinel Fine Particles Prepared by Chemical Coprecipitation, and Some Properties of Co-Ni-Li Spinel Fine Particles*
    H. Yamamoto, H. Nishio, and K. Kanaya

Magnetism and Super-Conductivity

  • Fabrication of Regularly Aligned Y-Shaped NI80Fe20 Arrays by the Damascene Technique and Their Characterization*
    T. Yamamoto, K. Machida, T. Yamaoka, T. Ishibashi, and K. Sato
  • Curie Temperature and Magnetic Exchange Interaction of Mg1+xFe2-2xTixO4 (0≤x≤0.5)*
    T. Shimizu, T. Yoshimura, H. Asano, and M. Matsui
  • Remote Temperature Sensor Made of Magnetoelastic Ribbon*
    S. Yoshizawa, Y. Shimojo, M. Nakamura, N. Kutsuzawa, S. Kambe, and O. Ishii

Thin Films

  • Electromagnetic Interaction in Iron-Based Ferromagnetic Oxide Films: The Influence of The Substrate and Temperature Depender*
    A. Kajima, T. Arita, Y. Tsuji, M. Inoue, and T. Fujii
  • Oscillation of The tunneling Conductance in Fully Epitaxial Double-Barrier Magnetic Tunnel Junctions with Layered Nano-Fe Islands*
    T. Nozaki, S. Nakamura, N. Tezuka, S. Sugimoto, and K. Inomata
  • Simulation of Magnetic Contact Duplication for Perpendicular Magnetic Recording Media*
    A. Izumi, Y. Nagahama, T. Komine, R. Sugita, and T. Muranoi
  • Preparation of Magnetic Tunnel Transistors with Double Tunnel Junctions*
    H. Nakanishi, H. Omae, Y. Fujiwara, M. Jimbo, T. Kobayashi, and S. Shiomi
  • Spin-Transfer Switching Property in the CPP-GMR Devices with Co-Fe and Co-Fe-B Free Layers*
    Y. Otani, H. Kubota, A. Fukushima, H. Maehara, S. Yuasa, and Y. Suzuki

Soft Magnetic Materials

  • Magnetic Power Loss Characteristics of Non-oriented Electrical Steel Sheets Under Stress*
    Y. Tani, A. Daikoku, M. Nakano, H. Arita, S. Yamaguchi, and Y. Toide

Measurement and High-Frequency Devices

  • Influence of Switching Power Supply Noise on the Magnetic Field Sensing of a High-Frequency Carrier-Type Magnetic Field Sensor*
    K. Takizawa, Y. Tomita, K.-I. Nishijima, T. Sato, K. Yamasawa, Y. Miura, and H. Nishio
  • Magneto-Optical Response to AC Magnetic Fields in DMS Films*
    A. Okada, and M. Imamura
  • TAD Digital Quadrature Detection and Its Application to Magnetic Sensing*
    S. Masuda, T. Watanabe, T. Mizuno, and T. Terasawa
  • Development of Position-Sensing System for an LC Resonating Slim Marker Using Phase Detection*
    S. Yabukami, T. Katoh, S. Hashi, K. I. Arai, and Y. Okazaki
  • Improvement of the Sensitivity of a High-Frequency Carrier-Type Magnetic Field Sensor Through the Use of an Edge Extension Structure*
    M. Sendoh, T. Nakai, N. Tachibana, N. Hoshi, H. Suzuki, N. Horikoshi, S. Yabukami, K. Ishiyama, and K. I. Arai
  • Application of Pd-Coated Magnetic Ribbon to a Remote Hydrogen Sensor*
    H. Satake, M. Nakamura, N. Kutsuzawa, S. Kambe, O. Ishii, K. Motoki, and S. Okuyama
  • Possibility of Quantitative Evaluation of a Current through Current-Induced Magnetic Field Detection Using MFM*
    D. Saida, T. Edura, K. Tsutsui, Y. Wada, and T. Takahashi
  • Enhancement of High-Frequency-Carrier Type Magnetic Field Sensors by Controlling the Annealing Temperature*
    Y. Murayama, T. Ozawa, N. Horikoshi, S. Yabukami, K. Ishiyama, and K. I. Arai

Power Magnetics

  • Complex E&S Modeling for Magnetic Field Analysis Taking Account of 2-D Vector Magnetic Properties*
    K. Nakanoue, S. Urata, Y. Nakahata, T. Todaka, M. Enokizono, and H. Shimoji
  • Development of Advanced Magnetizing Techniques by Means of an Improved VMSW Method*
    Y. Takino, Y. Nakahata, T. Todaka, and M. Enokizono
  • Cable-Less Type Magnetic Actuator Capable of Movement in a Pipe*
    H. Yaguchi
  • Prototype of a Cable-Less Magnetic Micro-mover: Proposal of an Actuator of Movers on a Magnetic Substance*
    H. Yaguchi
  • Performance Characteristics of Magnetic Planetary and Differential Gears for Accelerators in Which the Whole Depth of Outring Gear Has Been Corrected*
    K. Tsurumoto, M. Haneda, K. Yamanaka, Y. Oikawa, and T. Chiba
  • Iron Loss Calculation Using a Reluctance Network Analysis Model of a Permanent Magnet Generator*
    K. Nakamura, M. Ishihara, and O. Ichinokura
  • A Method for Modeling the Eddy Current in an RNA Model of an EIE Core*
    K. Nakamura, T. Tomonaga, S. Akatsuka, T. Ohinata, K. Minazawa, and O. Ichinokura
  • Reduction of the Cogging Force at the Outlet Edge of a Discontinuous Armature Linear Synchronous Motor*
    Y. J. Kim, H. Dohmeki, and D. Ebihara
  • Numerical Analysis of the Core Dimensions of a Magnetic Fault Current Limiter Assuming a Practical Design and Trial Production*
    H. Nakamichi, K. Yotsutsuji, S. Yamada, and M. Iwahara
  • Consideration of the Fundamental Characteristics of a Sinusoidal-Wave Output Inverter Utilizing Magnetic Oscillation*
    S. Okanuma
  • Effect of the Solenoid Dimensions Used in an Electromagnetic Launcher on the Height of Projection*
    T. Mizuno, M. Horiuchi, Y. Ohashi, H. Nishimoto, N. Kobayashi, and K. Katou
  • Study of the Thrust Force of a Swimming-Type Magnetic Micromachine*
    K. Kikuchi, A. Yamazaki, M. Sendoh, K. Ishiyama, and K. I. Arai
  • Torque Ripple Minimization for an SR Motor Using Freewheeling Mode*
    H. Goto, M. Sato, and O. Ichinokura
  • Study of a Cantilevered Magnetic Actuator with a Magnetic Thin Film*
    C. Yokota, A. Yamazaki, M. Sendoh, S. Agatsuma, K. Morooka, K. Ishiyama, and K. I. Arai
  • Disposable Pump System with a Spiral-Type Magnetic Micromachine*
    S. Hisatomi, A. Yamazaki, K. Ishiyama, S. Agatsuma, M. Sendoh, and K. I. Arai

Biomagnetic and Medical Applications

    • A Model of Phase Synchronization of Auditory the 40 Hz Component in MEG*
      K. Tanaka
    • Examination of Environmental Magnetic Fields in Office Space: Measurement of Environmental Magnetic Fields in Power-Receiving and Transformer Rooms*
      S. Oikawa, A. Haga, and K. Yamazaki

 

  • Errata*
(* in Japanese)

Previous article

Volume 30, No. 1 Contents

Next article

Volume 30, No. 3 Contents